Spectracide® Weed Stop® For Lawns Plus Crabgrass Killer3 (Ready-to-Use)
Item Details
-
KILLS WEEDS – NOT THE LAWN: When used as directed.
-
VISIBLE RESULTS IN 5 HOURS: Conquer unruly weeds and see visible results in as fast as 5 hours.
-
KILLS 470+ WEED TYPES AS LISTED: Kills broadleaf and grassy weeds including dandelion, chickweed and clover as well as crabgrass and yellow nutsedge – see product label for complete list of weed types.
-
KILLS THE ROOT: Kills weeds by contact down to the root.
- READY-TO-USE FORMULA: No mixing required.
PRODUCT DESCRIPTION:
Spectracide® Weed Stop® for Lawns Plus Crabgrass Killer₃ kills more than 470 types of weeds as listed, including crabgrass. This product kills weeds by contact – down to the root – producing visible results in 5 hours. This powerful formula kills broadleaf and grassy weeds, including dandelion, chickweed and clover, as well as crabgrass and yellow nutsedge.*
When used as directed, Spectracide® Weed Stop® for Lawns Plus Crabgrass Killer₃ kills weeds without harming your lawn. Apply when daytime temperatures are between 45° and 90° F. Lawn damage could happen above 90° F. Do not apply to Bermudagrass when daytime temperatures exceed 85°. Do not use on lawns containing bentgrass, St. Augustinegrass, bahiagrass, centipedegrass or carpetgrass. Read the entire label before using.
*See product label for complete list of weed types
ACTIVE INGREDIENTS
| 2,4-D, dimethylamine salt | 0.253% |
| Quinclorac | 0.121% |
| Dicamba, dimethylamine salt | 0.029% |
| Sulfentrazone | 0.015% |
| Other Ingredients | 99.582% |
| Total | 100.000% |
| THIS PRODUCT CONTAINS: | |
| 0.018 lb. 2,4-dichlorophenoxyacetic acid equivalent per gallon or 0.210% | |
| 0.010 lb. 3,7-dichloro-8-quinolinecarboxylic acid per gallon or 0.121% | |
| 0.002 lb. 3,6-dichloro-o-anisic acid equivalent per gallon or 0.024% | |
| 0.001 lb. N-[2,4-dichloro-5-[4-(difluoromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl]phenyl] methanesulfonamide per gallon or 0.015% | |
| Isomer Specific by AOAC Method. | |
HOW TO USE
1 Gallon container
BEFORE USE
- Shake well before each use.
- Open flip-top closure.
- Remove sprayer from its slot beneath the bottle handle and unwrap the tubing. Pull hose plug to completely extend tubing.
- Firmly press hose plug into opening in cap until it snaps into place.
- Slide switch on hose plug counter-clockwise to “OPEN.”
- Adjust nozzle to desired setting, SPRAY or STREAM.
- Hold sprayer below the level of the container and prime by pumping trigger several times until product is dispensed.
- Spray unwanted weeds until completely covered.
AFTER USE
- To store, turn sprayer nozzle off.
- Turn hose plug switch clockwise to “CLOSED.”
- DO NOT disconnect hose.
- Return sprayer to its slot. Hose can be pushed back into sprayer handle.
32 fl oz container
- Turn nozzle to coarse spray pattern. Avoid sprays that are too fine because they can drift and damage other plants.
- Spray unwanted weeds until completely covered.
